基于钻进状态监测的智能工况识别          下载免费PDF全文

范海鹏  吴敏  曹卫华  赖旭芝  陈略峰  陆承达 《探矿工程》2020,47(4):106-113

钻进过程状态监测旨在实时描述钻进工况，判断运行性能优劣程度进行非优追溯，及时指导司钻人员调整作业操作,保证钻进过程安全、高效、稳定开展。钻进工况是钻进系统运行状态的反映，因此开展面向状态监测技术的钻进工况识别研究具有重要的理论和应用价值。本文针对钻进工况识别问题，基于状态监测数据，建立基于支持向量机的钻进工况识别模型，对钻进工况进行识别。综合工况识别结果，对钻进效率进行评估，并对影响钻进效率的因素进行讨论，寻找提升钻进效率的手段。最后，采用钻进现场实钻数据进行仿真实验,验证所提方法的可行性和有效性。  相似文献   

多层构造油藏纵向细分计算单元对储量参数及结果的影响     

颜冠山  刘宗宾  宋洪亮  韩雪芳  王欣然 《地质与资源》2020,29(4):342-350

为满足油田中后期精细开发及后续调整挖潜的需要，亟需进行更精细的储量研究，其中最重要的一环就是纵向细分计算单元.对于多层构造油藏，纵向细分主要根据油层组内隔夹层分布特征、小层物性特征，细分到以小层或者分布特征和物性相近且纵向上连续分布的小层组合为计算单元.根据纵向细分计算单元前后储量参数选值的理论推导，结合储层的沉积展布特征，认为含油面积范围内无储层尖灭时，仅平面油层厚度差异较大的油藏平均有效厚度变小.含油面积范围内储层尖灭时，正常三角洲沉积储层的油藏各参数一般都变小；而辫状河三角洲沉积储层的油藏一般平均有效厚度变小，平均有效孔隙度和平均含油饱和度变大.这一结论可以有效指导储量评估过程中纵向细分计算单元方案划分，为同类油田的精细储量研究提供技术支撑.  相似文献   

考虑冲刷影响的筒型基础竖向极限承载力研究     

陆罗观  刘润  练继建  陈广思 《海洋工程》2019,37(3):69-77

大直径宽浅式筒型基础,阻水宽度大,在位工作期间受波浪海流作用,其周围土体易被冲刷。为研究单侧地基土体受冲刷后筒型基础的竖向极限承载力变化,通过引进冲刷率的概念,采用有限元方法研究了不同冲刷率下筒型基础的竖向极限承载力;并基于Meyerhof理论建立了计算不同冲刷率下筒型基础竖向极限承载力的极限平衡方法。研究结果表明,随着冲刷率增大,筒型基础的极限承载力出现不同程度的下降,当冲刷率为0.8时,即筒型基础单侧土体冲刷深度达6.4 m时,筒型基础的竖向极限承载力折减率为3.28%。建立的极限平衡算法可准确计算冲刷条件下筒型基础的竖向极限承载力。  相似文献   

Relationship Between Electrical Properties and Sedimentary Environment of the Longmaxi Formation Shale, Southern Sichuan     

YANG Kai  ZHANG Bing  WANG Xuben  HE Lanfang  YANG Hongyu  WANG Pengwan  TANG Jialin  DENG Jixin  ZHANG Cong 《《地质学报》英文版》2020,94(5):1531-1546

The Lower Silurian Longmaxi Formation in the south of Sichuan is a key player in the exploration and development of shale gas in China. Due to a highly complex topographic area, electromagnetic methods (EM) become important exploration means in this area. Many studies have been conducted on the shale mineral composition and electrical properties of shale, however, the correlation between sedimentary environments and the electrical properties of shale remain poorly understood. The electrical properties and sedimentary environment of the organic-rich shale of the Longmaxi Formation have been studied by means of X-ray diffraction, organic geochemistry, scanning electron microscopy and complex resistivity measurements. The discovered high quartz content of the Longmaxi Formation shale results in low resistivity. Deep-water shelf biogenic quartz contributes lower resistivity more than that of shallow-water terrigenous quartz. The deep-water anoxic and organic sedimentary environment led to major enrichment of pyrite, leading to a high polarization effect in shale. We present the correlation between the lithofacies types and electrical properties of Longmaxi Formation. The mixed siliceous shale lithofacies is the most favorable among the three lithofacies, which is characterized by high total organic carbon (TOC) content, high brittleness mineral content, high polarization and low resistivity (“three high and one low”). This feature is an effective identification of shale gas reservoirs by electromagnetic prospecting. Our study can provide constraints on electrical parameters of rocks for electromagnetic “sweet spot” exploration of shale gas, and so this has important geological significance to shale gas exploration and development.  相似文献   

不等式约束Partial EIV模型的WHP拟牛顿修正解法及其精度评定的SUT法     

王乐洋  邹传义  吴璐璐 《大地测量与地球动力学》2019,39(6):648-653

提出一种确定不等式约束Partial EIV模型解及精度评定的新方法，在总体最小二乘准则下，将附有不等式约束的Partial EIV模型转换为标准最优化问题。采取WHP拟牛顿修正的SQP方法求解，并利用SUT法对参数估值进行精度评定，可以减小迭代次数、提高收敛速度，且精度评定方法简单有效。  相似文献   

自然重砂成因矿物学特征及找矿指示作用     

董国臣  李胜荣  申俊峰  董朋生  李华伟  殷国栋  汤家辉 《地学前缘》2020,27(5):171-178

自然重砂是地质体经自然风化、剥蚀、搬运、沉积等地质作用而分离出的单矿物(或矿物组合)。自然重砂矿物晶体由于仍然保留有许多矿物成因信息,包括颜色、形态、化学成分、物理性质和矿物组合等特征,因此常用于追溯源区地质体或者找矿勘查。这种方法被认为是一种经济实用的找矿方法——自然重砂测量。本文基于全国自然重砂找矿的数据资料,系统梳理了自然重砂的矿物类型、出现频率及其分布等特点,分析了自然重砂的矿物组合和成因矿物学特征,研究了自然重砂矿物的源区烙印、搬运距离及标型指示矿物组合特征,探讨了自然重砂成因矿物学研究意义及其找矿应用前景。自然重砂矿物的颜色、形态及内部结构依然保留着明确的成因矿物学信息:其颜色和晶体形态具有继承性而与其源区母体联系起来,体现源区母体的特性;其矿物组成可分出残余原生重矿物(包括造岩矿物、副矿物、矿石矿物等)和新生重砂矿物两个部分,如赤铜矿、孔雀石等反映着源区岩性体的成分或者赋存状态特征,其矿物组合也在很大程度上继承原生共生矿物而体现诸如有无矿化等意义;重砂颗粒的磨圆度、边界光滑性等表面特征反映搬运距离,有利于明确响应源区母体或者物源,而具有良好的找矿指示意义。  相似文献   

Determination of Radiogenic 87Sr/86Sr and Stable δ88/86SrSRM987 Isotope Values of Thirteen Mineral,Vegetal and Animal Reference Materials by DS‐TIMS     

Jean‐Michel Brazier  Anne‐Dsire Schmitt  Eric Pelt  Damien Lemarchand  Sophie Gangloff  Tho Tacail  Vincent Balter 《Geostandards and Geoanalytical Research》2020,44(2):331-348

This work presents new ⁸⁷Sr/⁸⁶Sr and δ^88/86Sr_SRM987 isotopic values of thirteen mineral, vegetal and animal reference materials. Except for UB‐N, all our results are consistent with previously published data. Our results highlight intermediate precisions among the best presently published and a non‐significant systematic shift with the calculated δ^88/86Sr_SRM987 mean values for the three most analysed reference materials in the literature (i.e., IAPSO, BCR‐2 and JCp‐1). By comparison with the literature and between two distinct digestions, a significant bias of δ^88/86Sr_SRM987 values was highlighted for two reference materials (UB‐N and GS‐N). It has also been shown that digestion protocols (nitric and multi‐acid) have a moderate impact on the δ^88/86Sr_SRM987 isotopic values for the Jls‐1 reference materials suggesting that a nitric acid digestion of carbonate can be used without significant bias from partial digestion of non‐carbonate impurities. Different δ^88/86Sr_SRM987 values were measured after two independent Sr/matrix separations, according to the same protocol, for a fat‐rich organic reference material (BCR‐380R) and have been related to a potential post‐digestion heterogeneity. Finally, the δ^88/86Sr_SRM987 value differences measured between animal‐vegetal and between coral‐seawater reference materials agree with the previously published results, highlighting an Sr isotopic fractionation along the trophic chain and during carbonate precipitation.  相似文献   

Revisiting the existence of an effective stress for wet granular soils with micromechanics          下载免费PDF全文

Jérôme Duriez  Richard Wan  Mehdi Pouragha  Félix Darve 《国际地质力学数值与分析法杂志》2018,42(8):959-978

A possible effective stress variable for wet granular materials is numerically investigated based on an adapted discrete element method (DEM) model for an ideal three‐phase system. The DEM simulations consider granular materials made of nearly monodisperse spherical particles, in the pendular regime with the pore fluid mixture consisting of distinct water menisci bridging particle pairs. The contact force‐related stress contribution to the total stresses is isolated and tested as the effective stress candidate for dense or loose systems. It is first recalled that this contact stress tensor is indeed an adequate effective stress that describes stress limit states of wet samples with the same Mohr‐Coulomb criterion associated with their dry counterparts. As for constitutive relationships, it is demonstrated that the contact stress tensor used in conjunction with dry constitutive relations does describe the strains of wet samples during an initial strain regime but not beyond. Outside this so‐called quasi‐static strain regime, whose extent is much greater for dense than loose materials, dramatic changes in the contact network prevent macroscale contact stress‐strain relationships to apply in the same manner to dry and unsaturated conditions. The presented numerical results also reveal unexpected constitutive bifurcations for the loose material, related to stick‐slip macrobehavior.  相似文献   

Energy saving performance analysis of contra-rotating azimuth propulsor     

《Applied Ocean Research》2018

The energy saving performance of contra-rotating azimuth propulsor (CRAP) is investigated based on low order potential-based panel method. The hydrodynamic interactions among the forward propeller (FP), rear propeller (RP) and the pod unit (PU) which includes the pod body and the strut are considered through induced velocities which are obtained by panel method. In order to have a better understanding about the energy saving performance of CRAP, the hydrodynamic performance of a conventional propeller (CP) supplying the same thrust with CRAP at design condition is also calculated. At design condition, CRAP has a decrease in delivered power by approximately 8% comparing with CP, and the tangential induced velocities in slipstream show that CRAP recovers the rotational energy of slipstream effectively. At off-design conditions, the rotational speed of CRAP is adjusted to supply the same thrust with CP. In general, the delivered power of CRAP is significantly smaller than that of CP, and the energy saving performance of CRAP increases with the decrease of inflow velocity.  相似文献   

沉积物中硬质粘土层的研究进展          下载免费PDF全文

孔凡彪  徐树建  贾广菊 《山东国土资源》2018,34(3)

大量的钻孔资料表明,平原地区及其海域沉积物中普遍有硬质粘土层的存在。硬质粘土层在工程地质、地理学研究等方面具有重要的价值,它不仅是高层建筑的持力层,而且是研究全球环境变化事件、古气候演变的良好载体。该文阐述了硬质粘土层的一般特征、成因以及在粒度、地球化学元素、年代学、沉积环境等方面的研究进展,并展望了硬质粘土层在年代、物质来源和沉积环境等方面的研究方向,认为黄河三角洲硬质粘土层研究较少,需要开展大范围的、系统深入的、多学科的宏观和微观综合分析,挖掘硬质粘土层蕴含的古环境意义和应用价值。  相似文献